Made in the USA
Free Shipping on all Throttle Bodies
Follow Us:  
Previous
Four Barrel 8500 to 4500 Adapter Plate

Four Barrel 8500 to 4500 Adapter Plate

$139.99
Next

Mountain Motor Dual 275 Throttle Body

$729.99
Mountain Motor Dual 275 Throttle Body
Four Barrel 9500 Throttle Body

Four Barrel 9500 Throttle Body

$1,199.99

Four Barrel 9500 Throttle Body

$1,199.99

If you would like to switch from a carburetor intake to electronic fuel injection (EFI), Accufab has developed the Four Barrel 9500 high flow throttle body to meet your needs.

Description

Better Air Flow for More Power. The Accufab Four Barrel 9500 Throttle Body uses 3.5-inch bores and flows 5,476 CFM at 28-inches. There are no 4-barrel carburetors that can come close to matching that flow rating. If that’s not enough, racers can mount two of them together for double the volume.

In many race classes, racers are limited to a single 4-barrel carburetor or a single throttle body. Accufab used a clean sheet of paper and came to the conclusion that the standard intake manifold opening for the largest carbs available (the 4500 series) was just not adequate. The 9500 will not bolt up to a 4500 style intake manifold, which uses a 5.375-inch by 5.375-inch bolt pattern. The attachment bolt pattern for the 9500 is 7.0-inch by 7.0-inch and the required intake plenum opening needs to be at least 7.25-inches square.

Accufab’s goal was to design a better 4-barrel throttle body without trying to make it fit on the existing 22-square inch 4500 series intake manifold inlet opening, an inlet opening that was originally developed in 1969. The correct 9500 inlet opening is 52.5-square inches.

This size provides a 250% increase! Racers, or intake manifold manufacturers, will come up with better intakes to match the increase in air flow. Also, racers are creative and will most likely use a sheet metal plenum style intake manifold.

  • The Accufab 9500 throttle body is made from 6061-T6 billet aluminum and polished to an eye-catching finish. Accufab’s quality is second to none! Only the best components are used for unparalleled reliability and performance. Center-dump type progressive throttle linkage is included. Each throttle body weighs 4 pounds, compared to up to 13-pounds for a big 4500 series carburetor. Manufactured in the USA.

Application: These throttle bodies may be used with either EFI or mechanical fuel injection. For an EFI application, the throttle body is CNC machined to use a Ford Mustang 5.0L 1986-1993 throttle position sensor (TPS). Accufab has an optional adapter to accept the GM TPS if needed.

Accessories Included: None.

Throttle Body Dimensions. Bolt and Thread Info CLICK HERE

Disclaimer

Our products have been designed for off road/racing applications only. These products are not legal for use in the state of California on any pollution/control motor vehicle. These performance products are legal in California only on a racing vehicle which may never be used or driven on a public highway.
CA WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov

Additional information

Finish

Polished

CFM Air Flow

5476 CFM

Material

6061-T6 Billet Aluminum

Bolt Pattern

7 x 7

Reviews

There are no reviews yet.

Be the first to review “Four Barrel 9500 Throttle Body”

ACCUFAB RACING
1326 East Francis Street
Ontario, CA 91761
(909) 930-1751

© 2023 All Rights Reserved Accufab Inc

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
Join Waitlist We will inform you when the product is back in stock. Please leave your valid email address below.
Menu