Dodge Viper RT-10 Gen 1 1992-1995 Throttle Body
Free shipping on our throttle bodies and more. Online orders only. Click here > Shipping Details
Better Air Flow for More Power. This upgrade will greatly improve your Vipers throttle response and horsepower. It's the perfect starting point for future modifications.
Exceptional Quality. Accufab's throttle body quality is second to none! This throttle body is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The throttle body shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Only the best components are used for unparalleled reliability and performance. Manufactured in the USA.
Application. These throttle bodies are specifically designed as a direct bolt on for use on the 1992-1995 Dodge Viper RT-10 Gen 1.
Accessories Included: The RT-10 Gen 1 Viper throttle body set includes two 65mm throttle bodies, two gaskets and stainless steel socket cap screws.
General Throttle Body Installation Instructions:
Replacing the original throttle body and installing an Accufab throttle body is considered a “bolt-on” modification. In most cases it is an “off with the old and on with the new” process.
In some cases, some minor modifications are required. If, for instance, the new throttle body is larger than the inlet hole in the intake manifold, some minor grinding or chamfering of the inlet hole may be required. On the 1996-1998 Cobra installations, the bridge between the dual-hole intake manifold must be ground or cut out so as to permit the installation of the larger single blade Accufab throttle body. It will be necessary to remove the upper intake manifold lid to accomplish this.
All of these tasks are relatively easy to do, however, if any part of a throttle body installation is thought of as being difficult, or if you are uncomfortable with doing it yourself, we recommend getting advice or consultation from a professional.
In general, here are some generic throttle body installation instructions:
1. Disconnect the ground cable from your battery.
2. Remove the Throttle Position Sensor (TPS) from the original throttle body. If the original throttle body also has an Idle Air Control motor (IAC), remove that too.
3. Remove the original throttle body (typically, four bolts).
4. If the vehicle requires any modifications to the intake manifold, do that now.
5. When that is complete, install the new Accufab throttle body.
6. Then, re-install the IAC and TPS, reconnect the battery cable.
7. Click here > to view TPS Adjustment.
|CFM Air Flow||611 CFM|