Camaro LS1 Throttle Body - Fits FAST Intake

Camaro LS1 Throttle Body - Fits FAST Intake

Free Shipping

Free shipping on our throttle bodies and more. Online orders only.  Click here > Shipping Details

Accufab 90mm, 95mm, 105mm LS1 Camaro throttle body is designed for use on the Camaro LS1's FAST intake manifold bolt pattern.  Choose from 3 sizes to fit your application: 90mm, 95mm or 105mm. 


Better Air Flow for More Power: This upgrade will greatly improve your LS1's throttle response and horsepower. It's the perfect starting point for future modifications.

Exceptional Quality: Accufab's quality is second to none!  This throttle body is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish.  The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws.  Only the best components are used for unparalleled reliability and performance.  Manufactured in the USA.

Application: This throttle body is specifically designed as a direct bolt on for use on the Camaro LS1's FAST intake manifold bolt pattern.

Accessories Included: Each throttle body includes mounting screws only.


Camaro LS1 Trivia: For the 1998 model year, the Camaro received a facelift and now had a new front clip. This replaced the quartet of square inset headlights. Replacing the LT1 engine was the all-new 5.7 L (346 cuin) LS1 V8 engine rated at 305 hp (227 kW), which had also been introduced in the newly launched Corvette C5. The new engine featured an aluminum cylinder block with iron sleeves, reducing weight by about 95 lb (43 kg) as compared to the iron block LT1 engine. 1998 was the only year in which LS1 powered models had an actual working coolant temperature gauge. Minor changes were made to the suspension and the brakes were increased in size. Total production for 1998 was just 48,495 units in total. This is the first year that the SS model was actually manufactured solely by Chevrolet in twenty years.

General Throttle Body Installation Instructions:

Replacing the original throttle body and installing an Accufab throttle body is considered a “bolt-on” modification. In most cases it is an “off with the old and on with the new” process.


In some cases, some minor modifications are required. If, for instance, the new throttle body is larger than the inlet hole in the intake manifold, some minor grinding or chamfering of the inlet hole may be required. On the 1996-1998 Cobra installations, the bridge between the dual-hole intake manifold must be ground or cut out so as to permit the installation of the larger single blade Accufab throttle body. It will be necessary to remove the upper intake manifold lid to accomplish this.


All of these tasks are relatively easy to do, however, if any part of a throttle body installation is thought of as being difficult, or if you are uncomfortable with doing it yourself, we recommend getting advice or consultation from a professional.


In general, here are some generic throttle body installation instructions:
1. Disconnect the ground cable from your battery.
2. Remove the Throttle Position Sensor (TPS) from the original throttle body. If the original throttle body also has an Idle Air Control motor (IAC), remove that too.
3. Remove the original throttle body (typically, four bolts).
4. If the vehicle requires any modifications to the intake manifold, do that now.
5. When that is complete, install the new Accufab throttle body.
6. Then, re-install the IAC and TPS, reconnect the battery cable.
7. 
Click here > to view TPS Adjustment.

Technical Specs
Year Multiple
Bolt Pattern 4 1/8 x 2 3/4
Style Hose & Clamp, V-Band or Quick Disconnect
Material Aluminum
Finish Polished or Anodized
Notes Use with FAST instake manifold

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 8415
  • Brand: Accufab Racing
  • Product Code: LS1-FAST
  • Availability: In Stock
  • From ... $499.99

Available Options

Tags: camaro ls1 throttle body, camaro throttle body, 95mm camaro throttle body, 90mm camaro throttle body, 105mm camaro throttle body, ls1 throttle body, ls1

Accufab quick disconnect clamshell clamps are CNC machined from the highest quality billet aluminum ..
From ... $59.99

Accufab quick disconnect clam shell weld ferrules are currently available in sizes ranging from 1.25..
From ... $25.99

Accufab offers three different sized v-band clamps to meet your tubing connection needs. We currentl..
From ... $59.99

Accufab manufactures three different sized v-band style aluminum weld ferrules to meet your tubing c..
From ... $50.99